Cisco SPA112 2-Port Phone Adapter

~~$ 88.00~~ $ 75.00

Part Number: SPA112
2 Telephone Ports
Simultaneous Voice/Data Use
Caller ID, Call Waiting, Voicemail
Warranty: 1 year on part

Order Now

Specification

Brand: Cisco Small Business
Model: SPA112
Type: Accessories
Protocols: TCP/IP
Security:
Password-protected system reset to factory default
Password-protected administrator and user access authority
Provisioning, configuration, and authentication
HTTPS with factory-installed client certificate
HTTP digest: Encrypted authentication using MD5 (RFC 1321)
Up to 256-bit Advanced Encryption Standard (AES) encryption
SIP Transport Layer Security (TLS)
Ports:
1 WAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3)
2 RJ-11 FXS phone ports for analog circuit telephone device (tip and ring) Reset button
LEDs: Phone 1, phone 2, Internet, and power
Power: DC input voltage: 5V DC at 2.0A maximum
Power consumption: 5W
Switching type (100–240V) automatic
Power adapter: 100–240V and 50–60 Hz (26–34 VA) AC input, with 1.8m cord
Dimensions: 3.98" x 3.98" x 1.10"
Weight: 5.40 oz.
Temperature: 0ºC to 45ºC
Humidity: 10% to 90%, Non-Condensing
Data networking:
MAC address (IEEE 802.3)
IPv4 (RFC 791) upgradeable to IPv6 (RFC 1883)
Address Resolution Protocol (ARP)
Domain Name System (DNS) A record (RFC 1706) and SRV record (RFC 2782)
Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)
Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)
Internet Control Message Protocol (ICMP) (RFC 792)
TCP (RFC 793)
User Datagram Protocol (UDP) (RFC 768)
Real Time Protocol (RTP) (RFC 1889) (RFC 1890)
Real Time Control Protocol (RTCP) (RFC 1889)
VLAN tagging (IEEE 802.1p)
Simple Network Time Protocol (SNTP) (RFC 2030)
SIP channels support for both UDP and TCP transport
Voice gateway:
SIPv2 (RFC 3261, 3262, 3263, and 3264)
SIP proxy redundancy: Dynamic through use of DNS SRV A records
Reregistration with primary SIP proxy server
SIP support in network address translation (NAT) networks (including Serial Tunnel [STUN])
Highly secure (encrypted) calling using Secure RTP (SRTP)
Codec name assignment
G.711 (A-law and µ-law)
G.726 (32 kbps)
G.729 A
Dynamic payload
Adjustable audio frames per packet
Dual-tone multifrequency (DTMF): In-band and out-of-band (RFC 2833) (SIP information)
Voice features:
Independent configurable dial plans with interdigit timers and IP dialing (1 per port)
Call progress tone generation
Jitter buffer: Adaptive
Frame loss concealment
Full-duplex audio
Echo cancellation (G.165 and G.168)
Voice activity detection (VAD)
Silence suppression
Comfort noise generation (CNG)
Attenuation and gain adjustments
Flash hook timer
Message waiting indicator (MWI) tones
Visual messaging waiting indicator (VMWI) using frequency shift keying (FSK)
Polarity control
Hook flash event signaling
Caller ID generation (name and number): Bellcore, DTMF, and European Telecommunications Standards
Institute (ETSI)
Streaming audio server: Up to 10 sessions
Music on hold
Call waiting, call waiting and caller ID...
*More information. Please visit Cisco website.
Package Contents
Cisco SPA112 2 Port Phone Adapter
5V/2A power adapter
6-ft (1.83m) Ethernet cable
Quick Start Guide
Warranty: 1 Year on part