Hikvision DS-3E1310P-EI/M 8Port Fast Ethernet Smart POE Switch
$55.00
- Part Number: DS-3E1310P-EI/M
- 8 × 10/100 Mbps PoE ports,2 × Gigabit RJ45 port
- Total PoE Power Budget 60 W
- Support 802.1Q VLAN
- Support PoE watchdog to detect and restart the cameras that do not respond
- Support STP/RSTP Loop prevention
- Support cable detection to locate failure
- Up to 300 m Long Range PoE Transmission
- 6 kV Surge Protection
- Warranty 1 Year on part.
Contact for Price & Stock
Delivery 25 Provinces
Official Warranty
100% Genuine Product
Tech Support
Specifications
- Part Number: DS-3E1310P-EI/M
- General
- Shell: Metal material
- Net Weight: 0.54 kg (1.19 lb)
- Gross Weight: 1.08 kg (2.38 lb)
- Dimensions (W × H × D): 217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'')
- Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
- Storage Temperature: -40 °C to 85 °C (-40 °F to 185 °F)
- Operating Humidity: 5% to 95% (no condensation)
- Relative Humidity: 5% to 95% (no condensation)
- Power Supply: DC54 V,1.2 A
- Installation Mode: Desk-Mounted,Wall-Mounted
- Max. Power Consumption: 65 W
- Power Consumption in Idle: 5 W
- Surge Protection: 6 kV
- Network Parameters
- Ports: 8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port
- MAC Address Table: 4 K
- Switching Capacity:
- Whole-Device Performance: 9.6 Gbps
- Port Performance: 5.6 Gbps
- Packet Forwarding Rate
- Whole-Device Performance: 7.14 Mpps
- Port Performance: 4.17 Mpps
- Internal Cache: 2 Mbits
- PoE Power Supply
- PoE Standard: IEEE 802.3af,IEEE 802.3at
- PoE Power Pin: End-span: 1/2(-), 3/6(+)
- PoE Port: PoE: Ports 1 to 8
- Max. Port Power: 30 W
- PoE Power Budget: 60 W
- Software Function
- Long Range: Ports 1 to 8: up to 300 m.
- Long range performance may vary depend on camera model or cable condition.
- Port Isolation
- Ports 1 to 8: port isolation mode to improve network security
- Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
- PoE Watchdog
- Ports 1 to 8: auto detect and restart the cameras that do not respond.
- Loop Prevention
- Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
- Support 802.1D STP.
- Suppport 802.1w RSTP.
- VLAN
- VLAN is used for network scale planning and network health improvement.
- Support 802.1Q.
- Configurable VLAN ID from 1-4094.
- Support Trunk, Access port mode.
- Support Max. 4094 VLAN.
- HPP
- Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
- 1. Display the port rate.
- 2. Display the port bandwidth utilization rate.
- 3. Display the PoE power usage.
- 4. Display topology information.
- 5. Display the alarm status.
- 6. Restart ports and devices.
- 7. Enable port long-rage mode.
- 8. Remotely upgrade the device.
- System Maintenance
- Support device management via web.
- Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
- Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
- Support management via Hik-Central Pro.
- Support remote management via Hik-Partner Pro.
- Support cable detection.
- Supports 802.1ab LLDP for peer device discovery.
- Support port mirroring for fault locating.
